How to reset a Whirlpool dishwasher [in 2 minutes] (2023)

It is very common for a dishwasher to stop working mid-cycle. Almost most older model dishwashers have this serious problem.

However, most of these minor problems can be fixed by resetting the dishwasher. Yes, resetting the dishwasher solves most minor dishwasher problems.

Set a new setting on your dishwasher and start a new cycle to accommodate most problems.

How to reset a Whirlpool dishwasher?

Whirlpool dishwashers do not have a fixed button to reset the dishwasher. So you can reset the dishwasher by closing the off button.

Also, if the on/off button doesn't work, you can connect power to the dishwasher.

Now you have to wait a few minutes for the heat and the motor inside the dishwasher to cool down. After a few minutes, turn on the dishwasher.

The dishwasher has now been successfully reset. If there was a problem then it should be resolved now. The newer model has a special reset button.

All you need to do is press the power or reset button and hold it for a few minutes.

Tips for Resetting a Whirlpool Dishwasher

Depending on the model of the dishwasher, there are several ways to reset it. Also, on the older model of the dishwasher there is no button to reset the dishwasher.

You must manually reset the dishwasher. Here we will discuss two different ways to reset a Whirlpool dishwasher.

reset control panel

The dishwasher can be easily reset from the control panel. However, in some cases the control panel may not work properly or stop working.

This often happens when there is a power outage or overload on the dishwasher.

In this case, you will need to reset the dishwasher for it to work properly. Here's what to do to keep your dishwasher running.

1. Presson / off buttonif it works perfectly in your dishwasher. If not, delete orto switch offHepower cordof the dishwasher.

2. Now it's time to wait10 a 15minutes to start the dishwasher.

3. After waiting10 a 15minutes, turn on the dishwasher and thenlighton/off button.

4. Now selectaltosettings from your control panel.

5. After that, select anyheat regulationfrom the control panel to dry the dishes you wash. Now waitFew minutesand repeatcircle selectionand see if the dishwasherworking properly or not.

This is how you can reset your Whirlpool dishwasher from the control panel. Don't worry if this method doesn't work in your dishwasher. We will discuss another procedure to reset the dishwasher.

diagnostic function

The diagnostic feature can be very helpful, especially when your dishwasher is blinking and beeping.

I'm sure most of you have faced this dishwasher problem at some point. Diagnostic mode is a type of mode that causes the dishwasher to reset itself. Here you will find detailed instructions for activating the diagnostic function on your dishwasher.

1. Press"Heated Dry"and button"Normal"Press at the same time in your dishwasher.

2. Press"Heated Dry"Press the dishwasher button again and then"Normally"Button. This will force the dishwasher to go into diagnostic mode.

This way you will be able to activate diagnostic mode and possibly reset your dishwasher. This method should work on almost all new and old dishwasher models. If this method doesn't work, try again. If the problem persists, don't worry. We will talk about another way to reset the dishwasher.

User's manual

If none of the above methods work in your dishwasher, you should use an older version of the dishwasher.

Or you are not following the steps above correctly. However, there is nothing to worry about if you have the user manual.

The owner's manual contains all the information about the dishwasher, including reset techniques, error codes, and solutions to other important problems.

The owner's manual includes step-by-step instructions for troubleshooting the dishwasher.

In addition, you will also find a solution for the error codes. The Whirlpool dishwasher shows different error codes, which help us to know how to identify a particular problem.

This prevents the dishwasher from working. If you don't know the error codes, don't worry. We will discuss everything about this topic later in the article.

Why should you reset your dishwasher?

By now, most of us know why you should reset your dishwasher. Is it safe to reinstall the dishwasher over and over again?

Does restarting the dishwasher fix dishwasher problems? You may have many questions in mind.

This question is common to ask if you are tired of troubleshooting your dishwasher.

There are many reasons why you should reset your dishwasher. There is a situation where the dishwasher stops working and creates a problem.

This problem many times cannot be solved unless we start the cycle again. When you restart the dishwasher, all previous settings will be restored.

This allows the dishwasher to function properly without losing the dishwasher settings.

Most older dishwasher models do not have the ability to reset the dishwasher via a button.

You need a manual reset, but almost all dishwashers today have this reset feature. This made it easier to resolve error codes and other minor issues.

What to do after resetting the dishwasher?

Restarting the dishwasher takes 10-15 minutes. After that, check the settings of the dishwasher.

There are many things you can check in your dishwasher. The first thing is to check the pressure and temperature of the water.

Also, check if it has a humidity sensor or not. If there is moisture, give it time to dry. If not, this same problem could leave error codes.

You can also consultdrainage-runoffpipes, clean the casing with water and pour in fresh detergent.

What not to do to avoid damage?

Appliances need proper cleaning and care just like other things and appliances in your home.

In the same way, your dishwasher also needs cleaning and maintenance, only then can it work well. Here are some things you can do to prevent damage to your dishwasher.

1. The dishwasher filter needs to be cleaned periodically because it gets clogged with food residue, which can lead to malfunction.

2. Water pressure and temperature are other reasons for dishwasher malfunction. It is recommended that the water temperature be between 50 and 60 degrees Fahrenheit.

3. Power surges and blackouts are another major problem that could cause power surges in your dishwasher. Therefore, it is recommended to install a surge protector for the dishwasher.

4. Always check the amount of rinse aid and make sure it is not too low.

5. Rust is another reason for dishwasher malfunction. The metal within the rock can rust after many cycles of exposure to water. So to prevent this from happening, you can fix the chips with paint. The paint is not that expensive and is available in the supermarket.

6. Clean the drain of food remains. Food can get stuck in the drain, so it is necessary to clean the drain from time to time to prevent the dishwasher from giving error codes or an LED light.

What is a Whirlpool Dishwasher Error Code?

In the previous section, we discussed a lot about error codes. I'm sure you'll notice it even with two letters in your dishwasher.

Error codes are indications on a dishwasher that help us understand a problem with the dishwasher.

It is a very useful feature that allows us to solve problems before our dishwasher breaks down. There are several types of error codes that appear on dishwashers.

If you have your owner's manual, you'll find the meaning of most error codes there. But I'm sure some of you don't have a user manual to look up the meaning of some error codes.

Unlike other dishwashers, the Whirlpool dishwasher does not display error codes. The LED is flashing, so we need to understand the error.

Here is a list of error codes that the Whirlpool dishwasher displays:

1.F01 (flood against flood):

● LED 6: on

● LED 7: off

● LED 8: off

● LED 9: off

2.F02 (Water Fill Solenoid Fault):

● LED 6: off

● LED 7: on

● LED 8: off

● LED 9: off

3.F03 (Water Drain Fault):

● LED 6: on

● LED 7: on

● LED 8: off

● LED 9: off

4.F04 (thermostat error):

● LED 6: off

● LED 7: off

● LED 8: on

● LED 9: from

5.F06 (water filling waiting time):

● LED 6: off

● LED 7: on

● LED 8: on

● LED 9: off

6.F07 (damage to the hydraulic turbine):

● LED 6: on

● LED 7: on

● LED 8: on

● LED 9: off

7.F08 (Temperature Timeout Error):

● LED 6: on

● LED 7: off

● LED 8: off

● LED 9: on

8.F09 (error de software):

● LED 6: on

● LED 7: off

● LED 8: off

● LED 9: on

9.F10 (heating element failure):

● LED 6: off

● LED 7: on

● LED 8: off

● LED 9: on

10.F11 (Wash pump failure):

● LED 6: on

● LED 7: on

● LED 8: off

● LED 9: on

11.F12 (communication error between motherboard and screen):

● LED 6: off

● LED 7: off

● LED 8: on

● LED 9: on

12.F13 (motherboard error):

● LED 6: on

● LED 7: off

● LED 8: on

● LED 9: on

13.F15 (virtual communication):

● LED 6: on

● LED 7: on

● LED 8: on

● LED 9: on

These are some of the most common error codes for Whirlpool dishwashers. Now I hope you can understand these error codes by looking at the LED combination above.

There are several ways to fix these errors and one of the common methods to fix them is to reset the dishwasher.

In most cases, the reset works, but sometimes you need to check your owner's manual about the problem.

You may need in the future:-

• 11 Solution | Whirlpool Dishwasher Won't Clean [Quick Fix]
• 6 Solutions | Whirlpool dishwasher won't dry
• 5 Reasons Your Whirlpool Dishwasher Won't Spray [Solution]

conclusion

I hope you can reset nowwhirlpool dishwasherno problem. We discuss the various methods of resetting a dishwasher and the error codes that the dishwasher displays or displays frequently. Now you don't have to worry about small problems. You can easily fix this problem by resetting the dishwasher.

Frequent questions